1.cut out Sticker of choice 2.and removes the clear sheet. 3.place Sticker faces down on skin. 4.wet the Sticker thoroughly with a sponge Or wet wipes 5.After 20~30seconds, gently remove the backing paper 6.allow the Sticker dry.

How to remove Switch Sticker:

1. The holiday switch sticker can be used for about 1 ~ 2 months, and then begins to fall off naturally. This is just a gift, I hope everyone can have a better holiday experience. 2.dab Sticker with rubbing alcohol or baby oil.wait 10 seconds,then rub gently and repeatedly with more rubbing alcohol or baby oil until removed

Working principle

Input and output intermediate access controller. Wireless switch control current is turned off and on at 433 MHz

Controller parameter

1, working voltage: AC85-240V 60HZ/50HZ 2, working frequency: 433.92MHZ 3, the total load power: <1000W 4, receiving sensitivity: -108dBM 5, working method: wireless remote control 6, coding method: learning code 7, modulation method: ASK 8, working temperature: -10 deg C ~ +70 deg C 9, size: 72 * 38 * 26 (mm)

Wireless switch parameters:

1, working voltage: DC 3V 2, working frequency: 433.92MHZ 3. Transmitting power: <10mW 4. Remote control distance: <50 meters (indoor distance) 5, working method: wireless remote control 6, coding method: learning code 7, modulation method: ASK 8, working temperature: -10 deg C ~ +70 deg C 9, size: 86 * 86 * (mm) 10.standard battery,Cr2032 battery, ((Does not contain battery))

How to pair signals

1. Press and hold the controller for 3 seconds to enter the code matching mode (the code indicator light flashes 5 times). At this time, press the wireless switch 2 times and wait for 2 seconds. The code is successful (the default is always on);